Inconel Wire

Product Details:

We are offering Inconel 800 Wire to our client.

Specifications:

Product Details:

Alloy 625 is a nickel-chromium-molybdenum-niobium alloy with excellent resistance to a variety of corrosive media. In the soft annealed condition (grade 1), the alloy is used for wet corrosion applications and is approved by TÜV for pressure vessels in a temperature range from -196 to 450 °C (-320 to 842 °F). Alloy 625 is also approved by ASME in both the grade 1 and grade 2 conditions for sections I, III, VIII, and XII at temperatures defined in ASME Section IID (temperature limits vary by construction code). For high-temperature applications above 600 °C (1,112 °F), the solution annealed variant (grade 2) is generally used. The strength of Alloy 625 can be enhanced by heat treatment.

Chemical Composition:
Applications:
The soft annealed version of  Alloy 625 (grade 1) is used in the oil and gas industry, the chemical process industry,marine engineering and environmental engineering. Typical applications include:

• Equipment for the production of super phosphoric acid
• Plants for the treatment of radioactive waste
• Production pipe systems and linings of risers in oil production

Product Details:

INCONEL® (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Chemical Composition:

Applications:
The alloy is a standard material of construction for nuclear reactors. It has excellent resistance to corrosion by high-purity water, and no indication of chloride-ion stress-corrosion cracking in reactor water systems has been detected. For nuclear applications, the alloy is produced to exacting specifications and is designated INCONEL alloy 600T.

Typical applications are:

• Thermocouple sheathing in aggressive atmospheres.
• Vinyl Chloride monomer production: resistance to chlorine, hydrogen chloride, oxidation and carburization.
• Conversion of uranium oxide to hexafluoride: resistance to attack by hydrogen fluoride.
• Production and use of caustic alkalis, particularly in the presence of sulphur compounds.

Product Details:

INCOLOY® alloy 825 (UNS N08825/W.Nr. 2.4858) is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium.

Alloy 825 is a titanium-stabilized fully austenitic nickel-iron-chromium alloy with additions of copper and molybdenum. Alloy 825 is characterized by:

• High resistance to chloride-induced stress corrosion.
• Good resistance to chloride-induced pitting and crevice corrosion.
• Good resistance to oxidizing and non-oxidizing hot acids.
• Good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550°C (1.020°F).
• Approval for pressure vessels with wall temperatures up to 450°C (842 °F) acc. to VdTÜV and 538°C (1,000°F) for Section VIII Division 1 vessel acc. to ASME.

Chemical Composition:
Applications:

• Applications include chemical processing, pollution control, oil and gas recovery, acid production, pickling operations, nuclear fuel reprocessing, and handling of radioactive wastes.
• Applications for alloy 825 are similar to those for INCOLOY alloy 020.